Καλησπερα σας,
Χτες κανοντας μερικα πειραματα στη συνδεσμολογια των πεταλιων μου παρατηρησα οτι βγαζοντας το MXR EVH PHASE 90 απο την αλυσιδα ο ηχος εγινε πολυ πιο ζωντανος με περισσοτερα "ζωνατανα" πριμα...
Η συνδεσμολογια ειχε ως εξης:
ENGL SCREAMER---->BOSS NS-2(MXR 6 BAND στη λουπα του)----->MXR EVH PHASE 90---->Κιθαρα
Και φυσικα παρεμεινε η ιδια με μοναδικη διαφορα το MXR...ψαχνοντας σε φορουμ βρηκα αυτο:
This is why the MXR method of adding a buffer to the front of the circuit, to raise its input impedance, will never be more than a stopgap measure. If they wanted to fix it properly, they could have placed the buffer in front of the switch instead - then the total input impedance the guitar "sees" would have been 1meg, regardless of what pedal follows it. Either that or wire for true bypass, where the input impedance would have been irrelevant. As is, the performance of the MXR in bypass will be subject to change depending on what's in front of (and after) it. Stick a buffered (Boss or similar) pedal in front of it, and the problem all but goes away. Run the guitar straight into the MXR with a 500K pedal following it, and you'll lose a lot of treble and punch...
Δηλαδη αν βαλω ενα BOSS TUNER το προβλημα πλεον δε θα υφισταται?
Καμια παρόμοια εμπειρία?
Ευχαριστω
Χτες κανοντας μερικα πειραματα στη συνδεσμολογια των πεταλιων μου παρατηρησα οτι βγαζοντας το MXR EVH PHASE 90 απο την αλυσιδα ο ηχος εγινε πολυ πιο ζωντανος με περισσοτερα "ζωνατανα" πριμα...
Η συνδεσμολογια ειχε ως εξης:
ENGL SCREAMER---->BOSS NS-2(MXR 6 BAND στη λουπα του)----->MXR EVH PHASE 90---->Κιθαρα
Και φυσικα παρεμεινε η ιδια με μοναδικη διαφορα το MXR...ψαχνοντας σε φορουμ βρηκα αυτο:
This is why the MXR method of adding a buffer to the front of the circuit, to raise its input impedance, will never be more than a stopgap measure. If they wanted to fix it properly, they could have placed the buffer in front of the switch instead - then the total input impedance the guitar "sees" would have been 1meg, regardless of what pedal follows it. Either that or wire for true bypass, where the input impedance would have been irrelevant. As is, the performance of the MXR in bypass will be subject to change depending on what's in front of (and after) it. Stick a buffered (Boss or similar) pedal in front of it, and the problem all but goes away. Run the guitar straight into the MXR with a 500K pedal following it, and you'll lose a lot of treble and punch...
Δηλαδη αν βαλω ενα BOSS TUNER το προβλημα πλεον δε θα υφισταται?
Καμια παρόμοια εμπειρία?
Ευχαριστω